Search found 65 matches

by lsmod
Tue Jan 22, 2019 9:31 am
Forum: STM Core
Topic: STM32 core support for Arduino
Replies: 21
Views: 892

Re: STM32 core support for Arduino

Right, as you install the arm gcc toolchain and also the Arm CMSIS. 395M arm-none-eabi-gcc/ 262M CMSIS/ There was no possibility to differ this in the board manager. The mapel core seems to be uninstalled. I will try out the development version next to test serial USB functionality ... enableDebugP...
by lsmod
Sun Jan 20, 2019 5:27 pm
Forum: STM Core
Topic: STM32 core support for Arduino
Replies: 21
Views: 892

Re: STM32 core support for Arduino

BennehBoy wrote:
Sun Jan 20, 2019 2:18 pm
You need to download that library and put it in your user libraries folder...
Yes - thanks a lot!
The examples are added to the tree and are compiled without problems.
by lsmod
Sun Jan 20, 2019 1:53 pm
Forum: STM Core
Topic: STM32 core support for Arduino
Replies: 21
Views: 892

Re: STM32 core support for Arduino

BennehBoy wrote:
Sun Jan 20, 2019 1:28 pm
https://github.com/stm32duino/STM32RTC
Later i will have a closer look

Code: Select all

RTC_Tests:15:22: error: STM32RTC.h: No such file or directory
 #include 
                      ^
compilation terminated.
exit status 1
STM32RTC.h: No such file or directory
by lsmod
Sun Jan 20, 2019 1:45 pm
Forum: STM Core
Topic: STM32 core support for Arduino
Replies: 21
Views: 892

Re: STM32 core support for Arduino

https://github.com/stm32duino/STM32RTC What are you trying to do with PB4? It is GPIO by default on STM core for bluepill. Thanks - i will try to make an example for using RTC. I mention the direct port access http://stm32duinoforum.com/forum/viewtopic.php?f=48&t;=4521#p52582 It is working except PB4. But ...
by lsmod
Sun Jan 20, 2019 12:20 pm
Forum: STM Core
Topic: STM32 core support for Arduino
Replies: 21
Views: 892

Re: STM32 core support for Arduino

CDC is in the base github version as of about a week ago. Then this feature is brand new! It's not surprising that it is not running, when it is only in the development path. There was a stupid configuration error for serial upload. :oops: It must be /dev/ttyUSB0 and not /dev/ttyS0 . So this featur...
by lsmod
Sun Jan 20, 2019 9:16 am
Forum: STM Core
Topic: STM32 core support for Arduino
Replies: 21
Views: 892

Re: STM32 core support for Arduino

For CDC you'll need to get the github dev version, 1.40 release doesn't include it. Thank's for the tip - but how do i get it? I have the problem to be confused by the mass of different solutions, dependent on different cores and MCU / boards. Of course it is no problem to get familiar with this wh...
by lsmod
Sat Jan 19, 2019 7:14 pm
Forum: STM Core
Topic: STM32 core support for Arduino
Replies: 21
Views: 892

Re: STM32 core support for Arduino

Up to now i see no way to use the USB interface as usb serial. None of the includes are working :( //#include #include USBCompositeSerial CompositeSerial; uint32_t counter = 0; void setup() { CompositeSerial.registerComponent(); USBComposite.begin(); delay(200...
by lsmod
Sat Jan 19, 2019 6:44 pm
Forum: STM Core
Topic: STM32 core support for Arduino
Replies: 21
Views: 892

Re: STM32 core support for Arduino

In ../arduino15/packages/STM32/hardware/stm32/1.4.0/cores/arduino/stm32/ PinAF_STM32F1.h i found static inline void pinF1_DisconnectDebug(PinName pin) { /** Enable this flag gives the possibility to use debug pins without any risk * to lose traces */ #ifndef STM32F1_LOCK_DEBUG // Enable AFIO clock _...
by lsmod
Sat Jan 19, 2019 4:30 pm
Forum: STM Core
Topic: STM32 core support for Arduino
Replies: 21
Views: 892

Re: STM32 core support for Arduino

Besides - manually flashing the blink program with 10576 Bytes is working too. Now back again to the question of using USB and to get an 8 bit GPIO port access ... Have a look at the 8 bit GPIO first. mrburnette's hint https://github.com/rust-embedded/discovery/blob/master/src/07-registers/rtrm.md s...
by lsmod
Sat Jan 19, 2019 4:11 pm
Forum: STM Core
Topic: STM32 core support for Arduino
Replies: 21
Views: 892

Re: STM32 core support for Arduino

The installation works as descripted in https://github.com/stm32duino/wiki/wiki/Getting-Started . :) (This will install 896,2 MB stuff.) Fine. Trying my first steps again with the new core: Compiling my LCD-example http://stm32duinoforum.com/forum/viewtopic.php?f=28&t;=4500#p52248 only works after commentin...