GD32f105rbt6

Boards based on the GigaDevices GD32F103 microcontroller
Post Reply
azizkurosaki
Posts: 3
Joined: Sat Aug 12, 2017 5:41 pm

GD32f105rbt6

Post by azizkurosaki » Fri Jun 22, 2018 11:11 am

good evening friend,first letme introduce my self,im aziz from indonesia
i have small project,i see a lot of chinese led controller which use GD32f105rbt6 ,i have try to modify the program use this setup :
MCU STM32f103rbt6 ,for the gpio and some other function worked verry well,now i want to use Serial4 on this device,but shown error that "Serial4 not defined in this scope",i findout that STM32f103rbt6 was defined as STM32_MEDIUM_DENSITY then i try to change it to STM32_HIGH_DENSITY and change the STM32_F1_LINE to STM32_F1_LINE_CONNECTIVITY,but problem still happen
now i want to create new variant stm32f105rbt6,any sugest which part of the library that must be add or changed
thanks for attention

stevestrong
Posts: 3053
Joined: Mon Oct 19, 2015 12:06 am
Location: Munich, Germany
Contact:

Re: GD32f105rbt6

Post by stevestrong » Fri Jun 22, 2018 11:22 am


Post Reply